51
ANSWERING MACHINE
Modifying the OGM
Recording a personal outgoing
message
On the navigator key , press or
until the ANS. MACH screen is displayed.
Press OK to confirm.
Select OUTGOING MESS. using or .
Press Valid. .
Select CHANGE using or . Press
Valid. .
Press OK to start recording your OGM.
At the sound of the beep transmitted through
the handset, start talking in the handset
microphone.
To stop recording press End .
Your outgoing message is automatically
played back.
At the end of the playback, a confirmation
screen asks you if you want to keep this new
outgoing message. Press Yes to keep
your OGM or No to record it again.
In order to modify an OGM, you
must first turn on the answering
machine. The OGM that will be
modified will be that of the
answering machine activated
(answer only or answer and record).
Using a pre-recorded anonymous
OGM
On the navigator key , press or
until the ANS. MACH screen is displayed.
Press OK to confirm.
Select OUTGOING MESS.. Press Valid. .
Select ANONYMOUS using or . Press
Valid. .
Press Yes to replace your personal
outgoing message with the anonymous
outgoing message.
The anonymous outgoing message for the
answering machine mode used (answer
only/answer and record) is automatically
played back.
Deleting all your personal OGMs
On the navigator key , press or
until the ANS. MACH screen is displayed.
Press OK to confirm.
If you select the anonymous mode,
your personal outgoing message
will be definitely replaced by the pre-
recorded outgoing message. You
will however be able to record a new
personal outgoing message (see
previous paragraph).
If you delete all your personal
outgoing messages, the answering
machine will automatically be
deactivated.
LU 252973993 D30 T V H Australie.book Page 51 Mercredi, 20. juin 2007 9:47 09
To Next Page
Loading...
Need help?
General
