26
SMS SETTINGS
SMS SETTINGS
You can access the SETTINGS menu via the
SMS menu or the ADVANCED SET.
submenu in the SETTINGS menu.
Modifying the SMS centre
numbers
This function is used to modify the SMS
centre numbers (depending on the operator).
You can enter up to 4 SMS centre numbers
to receive and one to send.
By default, the send number is programmed
in SMS 2 centre and the reception number in
SMS 1 centre.
On the navigator key , press or
until the SMS screen is displayed, press OK
to confirm.
Select
SETTINGS
using
or
. Press
Valid.
.
Select
SMS CENTRES
using
or
. Press
Valid.
.
Select the SMS centre you want to enter
or modify the number using keys
or
.
Press Valid. .
An information screen gives the number of
the SMS centre.
• To change the number, press Edit .
Enter the new number in the input screen
and press Valid. .
• To keep the number, press Confirm .
Carry out this operation again for all other
SMS centres.
Then define the SMS centre to be used for
sending.
Choose the SMS transmission centre
Select SEND CENTRE using keys
or
.
Press Valid. .
• To change the send SMS centre, press
Edit . Select the required centre using
keys
and
and press Valid. .
• To keep the current SMS centre, press
Confirm .
To exit the menu, press the red key .
Modifying the terminal number
If you have several SMS-type devices
connected to the same telephone line, you
must assign a different number ranging from
0 to 9 to each device.
Remember to give your contacts the terminal
number on which you would like to receive
your messages.
Telephone line
0123456789
Terminal
number
1 MOTHER
2 FATHER
4 COLLECTIV
To Next Page
Loading...
Need help?
General
