49
SETTINGS
Setting a PABX prefix
If a private automatic branch exchange is
used, you can programme the external call
prefix.
With this function you can set the:
• PABX prefix number,
• dialled number length at which point the
PABX will be automatically dialled (this
length is called "digit before prefix"),
• prefix status (on or off).
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid. .
Select SET LINE. Press Valid. .
Select PABX PREFIX using or . Press
Valid. .
An information screen presents the PABX
setting in progress. Press or key.
Press Yes , to modify this setting.
Select the desired option:
- ACTIVATE/DEACTIVATE: to select a
status.
- PREFIX: to enter the number giving you
access to the outside line.
- EDIT LENGTH: to specify the «digits
before prefix».
- EXIT PABX: to exit the menu.
To modify the prefix, select PREFIX using
or , press Valid. .
Enter the prefix using the keypad, press
Valid. .
To modify the digits before prefix, select
EDIT LENGTH using or , press
Valid. .
Enter the digits before prefix using the
keypad, press Valid. .
To exit the menu, press the red key .
LU 252973993 D30 T V H Australie.book Page 49 Mercredi, 20. juin 2007 9:47 09
To Next Page
Loading...
Need help?
General
