57
TAM SETTING
On the navigator key , press or
until the ANS. MACH menu is displayed,
press OK to confirm.
Select SETTINGS using or . Press
Valid. .
Select RECORD MODE using or . Press
Valid. .
Press Edit to modify the recording quality
level displayed on the screen. Press
Valid. .
To exit the menu, press the red key .
Number of rings
This parameter enables you to set the
number of times your telephone rings before
the answering machine answers a call. The
number of rings can be set between 2 and 7.
You can also select the Time saver mode.
The Time saver mode automatically
determines the number of rings based on the
number of messages left on the answering
machine.
If there are no new messages on the
answering machine, the number of rings will
be 4, otherwise the number of rings will be 2.
On the navigator key , press or
until the ANS. MACH menu is displayed,
press OK to confirm.
Select SETTINGS using or . Press
Valid. .
Select NO OF RINGS using or . Press
Valid. .
The programmed number of rings is
displayed on the screen.
Press Edit to modify the current number.
In the list, select the desired number of rings
(between 2 and 7) using or or the Time
saver mode, and press Valid. .
To exit the menu, press the red key .
LU 252973993 D30 T V H Australie.book Page 57 Mercredi, 20. juin 2007 9:47 09
To Next Page
Loading...
Need help?
General
