Sagem D30V User Manual

43
SETTINGS
To exit the menu, press the red key .
Authorising listening in
The intrusion function authorises or prevents
a second handset registered on the same
base from joining in a current conversation. If
the intrusion mode is active, it is then
possible to join a conversation in progress
using another handset.
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select SECURITY using  or . Press
Valid. .
Select INTRUSION using  or . Press
Valid. .
A screen displays the current status (on or
off).
• To change the status, press Edit .
• To keep the status, press Valid. .
To exit the menu, press the red key .
Carefully note down the base code
number. You will need this code to
change certain settings.
HANDSET SETTINGS
Registering a new handset to a
base
To register a new handset to a base you
must:
• put the handset in registration mode,
• put the base in registration mode.
Once this is done, the registration (mutual
recognition of the base and the new handset)
will be done automatically (registration can
take a few seconds).
Take the handset to be registered:
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET HANDSET using  or . Press
Valid. .
Select REGISTRATION. Press Valid. .
Press Yes to put the handset in
registration mode.
The handset enters the registration mode.
If the code of the base has been
modified (different from 0000), the
registration will not be possible with
this procedure, refer to paragraph
Personal registering, page 45.
LU 252973993 D30 T V H Australie.book Page 43 Mercredi, 20. juin 2007 9:47 09

Sagem D30V Specifications

General

Brand	Sagem
Model	D30V
Category	Cordless Telephone
Language	English