Sagem SAGEM-LINK F - Page 33

SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 33/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
Cable References for SAGEM LINK F
The cables which can be connected to the IDU front panel are shown in Figure 1.27.
To Other IDU
Ethernet straight or crossed cables
To PC /LT
To ODU
or
IDU to ODU cable
(Balanced or Unbalanced )
2 Mbit/s In/Out Cable
To Distribution Panel
Ethernet straight or crossed cable
To Network
Manager
(Network Management)
Telephone Handset
To DC Power
Source
Straight cable
Crossed cable
To modem
12 21
20
13
9
5 24 30
21
20
Main
mux
Tribs
Cust
Call
S
On
Of
f
POW ER
Figure 1.27 – Cables for a Terminal Station – Front Panel
The cables which can be connected to the IDU rear panel are shown in Figure 1.28.
AUX3 Data Channel Cable
To Distribution
Panel
14
6
37
7
MGMT2
Aux2
Aux1
MGMT1
AUX3
ALARM RELAYS & DRY LOOPS
OR
To PC
15
T
o Distribution
Panel
Alarm Relays & Dry Loops Cable
To Distribution
Panel
O
R
To EOW 300
Figure 1.28 – Cables for a Terminal Station – Rear Panel
In a relay station IDU are connected "back to back". Typical connection is given on Figures 1.29 and 1.30