Sagem SAGEM-LINK F - Issue 04: July

SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 96/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
The following windows appears :
• Click on the case corresponding to the new configuration and validate
• Switch off the IDU and connect ODU cables
• Switch on the IDU
.
Note : When changing system configuration on a link, it is important to have always the same
configuration on both ends of the link. Do not switch on the equipment until the far end has been
modified accordingly.
A 1+1 configuration on one end and a 1+0 configuration on the other end will cause a software issue.