SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 60/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
RSL Threshold
Choose
Threshold between
-60 and -80 dBm
3.2.4.5 - Setting the Custom Alarm Relay
A custom alarm is available and can be used to monitor internal or external alarms. The following
screen explains how to configure this alarm.
Affect Local Loop 1
on
custom Alarm Relay
Enter an Alarm name
Validate
Once the custom alarm relay has been configured, the following message appears :
To Next Page
Loading...