SAGEM-LINK F 288055571-04
Installation and Operation Manual
Page 86/142
Issue 04 : July 2005
Reproduction and communication prohibited without the written permission of Sagem Communication
3.3.6.2 - PPP Configuration Menu
Click on the PPP Configuration /local or remote menu.
The following screen appears :
This menu allows to configure the MGMT1 and MGMT2 declared PPP links. PAP and CHAP protocols
cannot be used at the same time.
When a PAP or CHAP authentication request is activated on a port the NMI requests the host to
identify itself. If this ID is not present in the list the communication is refused by the NMI and it is not
established.
If no PAP or CHAP authentication request from the NMI is active, the NMI responds to authentication
request from the remote equipment.
The optional PPP negotiations like IP address recognition, asynchronous map for character encoding
or magic number are inhibited.
The only optional possible negotiation regards MRU frame length (default : 1500 bytes).
MGMT1 and MGMT2 PAP or CHAP are independent.
PAP configuration : enter users and corresponding passwords (1 to 18 characters each).
CHAP configuration : enter host name and secret linked to this name (1 to 18 characters each). The
hostname is unique and common to all ports.
CHAP authentication does not make periodical tests once the communication has been established.
PPP protocol does not maintain any transmit activity .
To Next Page
Loading...