Saltillo TouchChat Express Series User Manual

TouchChat Express User’s Guide 104
Setting up and Using iPad Switch Scanning
As an alternative to directly choosing each button on the screen, single-switch and two-switch scanning
are available.
Enabling Scanning
Press the device’s Home button. Then choose Settings > General > Accessibility > Switch Control. Turn
Switch Control on.
Defining the Switches
You can either use an external switch that is plugged into device switch jack A or B or you have the
option to use the screen as a switch.
To use an external switch:
1. Plug the switch into either switch jack A or B. If you are using two switches, plug a switch into each.
2. Choose Settings > General > Accessibility > Switch Control.
3. Choose Switches > Add New Switch > External.
4. Press the external switch.
5. Name the switch.
6. Choose the switch action to perform.
• If you are using just one switch, choose Select Item.
• If you are using a second switch, choose Add New Switch. For the switch action, you could
choose Move To Next Item.
• If you need another option, you can use the screen as a switch.
After setting up your switch:
Press the device’s Home button. Then choose Settings > General > Accessibility > Switch Control. Turn
Switch Control off and then back on.
Switch jack A
Switch jack B
TouchChat Express 8 used as example

Saltillo TouchChat Express Series Specifications

General

Brand	Saltillo
Model	TouchChat Express Series
Category	Conference System
Language	English