ER-180 Electronic Cash Register AU Operating Instruction • 15
Item Registrations
Item registrations on ER-180 are made into Open or Preset Price with Departments and PLUs.
• All Departments are located on the keyboard for directly access.
• All PLUs are only accessed by entering the PLU code number, then pressing PLU function
key on the keyboard.
The key sequence for Non-Single Item Department/PLU and Single Item Department/PLU are the
same. The cash drawer will open immediately after a Single Item Department/PLU is registered
without tender key. However, if another Non-Single Item Department/PLU has already been entered,
a Single Item Department/PLU will not process as a single item sale. The register will expect a tender
key to be pressed to finalise the transaction.
To perform a item registration, need to turn control lock to REG-Mode if there is no specific
instruction given.
Department Entry - Open Price
1. Enter an amount on the ten key pad. Do
not use the decimal key.
For example, for $2.99, enter:
2 9 9
2. Press a Department key.
For example, press DEPT1:
DEPT1
SAMPLE RECEIPT
02-01-10___14-30
001
2•99
3•00
2•99
0•27
004-00
#
TX
1
CA
_
TX
1
TX
1
1
Department Entry - Preset Price
1. Press a preset Department key.
For example, press DEPT5:
DEPT5
SAMPLE RECEIPT
02-01-10___14-30
005
2•99
3•00
2•99
0•27
005-00
#
TX
1
CA
_
TX
1
TX
1
1
To Next Page
Loading...
