Sam4s ER-180 User Manual

ER-180 Electronic Cash Register AU Program Mode Programming • 39
System Options
There are two sets of options of System Options. To program System Option, the whole set of options
need to enter all together at once, from N1, N2 … to N5 then press RA (for option 1) or PO (for
option 2). The Preset value has been highlighted (Bold Font). For example, if N2 option of option 1 is
about to changed into NOT SKIP (value = 0), the whole 5 numbers have to be entered together as 0 0
0 0 0, then RA.
Option 1
1. Turn mode key to PGM mode,
2. Enter the set of 5 number for the 5 options in option 1,
N2 N1 N4 N3 N5
3. Press RA key to finalise the programming.
RA
NO OPTION VALUE = 0 VALUE = 1
N1
CASH DECLARATION
NOT COMPULSORY
COMPULSORY
N2
ZERO SKIP IN REPORT
NOT SKIP
SKIP
N3
Z REPORT REPEAT
NOT REPEAT
REPEAT
N4
RF / VD / GROSS TOTAL
PRINT IN REPORT
PRINT
NOT PRINT
N5
SUBTOTAL PRINT
PRINT
NOT PRINT
Option 2
1. Turn mode key to PGM mode,
2. Enter the set of 5 number for the 5 options in option 1,
N2 N1 N4 N3 N5
3. Press PO key to finalise the programming.
PO
NO OPTION VALUE = 0 VALUE = 1
N1
GRAND TOTAL TO PRINT
PRINT
NOT PRINT
N2
GRAND TOTAL RESET
AFTER Z REPORT
NOT RESET
RESET
N3
Z COUNTER RESET AFTER
Z REPORT
NOT RESET
RESET
N4
CONSECUTIVE NUMBER
AFTER Z REPORT
NOT RESET
RESET
N5
DATE PRINT
PRINT
NOT PRINT

Sam4s ER-180 Specifications

General

Brand	Sam4s
Model	ER-180
Category	Cash Register
Language	English