ER-180 Electronic Cash Register AU Getting Started • 1
Getting Started
About the ER-180
The Sam4S ER-180 features a 48-position keyboard with traditional raised keys. This keyboard
accommodates 16 Departments and works best in retail stores, or shop where it is not necessary to
place a large number of preset price items on the keyboard.
Unpacking
1. Unpack and unwrap cash register.
2. Locate in the packing the following items.
• 1 DC power supply
• 1 roll of paper
• 1 set of control keys (5 pcs., REG, VD, Z, P, C one of each )
• 3 AA size batteries
• This Operation and Programming Manual
• 1 rewind spindle for journal tape
3. Plug the register DC power supply into a grounded outlet, connect the cord to the right-
hand-side of the register, insert a control key and turn the control key to accessible
location(s) with the key.
To Next Page
Loading...
