SAM4s ER-180T Operator's & Programming Manual v1.4 Quick Program Guide 17
Quick Program Guide
Introduction
First, refer to “Getting Started” on page 9 to unbox, clear memory, and load the paper on your
SAM4s ER-180T. Next, you will need to perform a few basic programs to get your register
up and running:
1. Set the date and time.
2. Program your tax rate.
3. Set departments for open or preset and taxable or non-taxable operation.
Your register is now ready for most merchant environments.
There are many other programs described in this manual that allow you to customize your
cash register program. Read the manual carefully and if necessary, consult with your SAM4s
dealer for assistance.
To Next Page
Loading...
