Sam4s ER-180T Series - Program 200 - PLU Price;HALO Programming

60  Program Mode Programming SAM4s ER-180T Operator's & Programming Manual v1.4
Program 200 - PLU Price/HALO Programming
If a PLU is open, set the HALO (high amount lock out) here. If a PLU is preset set the preset
price here.
1. Turn the control lock to the P position.
2. To begin the program, enter 2 0 0, press the SBTL key.
0 SUBTOTAL0 2
3. Select the PLU or PLUs you wish to program in one of the following ways:
 Enter the PLU number (1-500) and press the PLU key, or
PLU
Enter the PLU#,
(1-500)
 Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
PLU
Enter the PLU#,
(1-500)
Enter the PLU#,
(1-500)
PLU
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a
preset price.
X/TIME
(
X
)
5. To program additional PLUs, repeat from step 3, or press the CASH/TEND
key to finalize the program.
CASH/TEND
(
=
)