Sam4s ER-180T Series - Miscellaneous Programming; Clerk Description Programming

SAM4s ER-180T Operator's & Programming Manual v1.4 Program Mode Programming  75
Miscellaneous Programming
Clerk Description Programming
You can program a clerk name to print on receipts and reports.
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SSUBOTAL key.
0 SUBTOTAL 1 8
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
(
X
)
4.
Enter up to 8
three-character
codes
SUBTOTAL
5. Press the CASH/TEND key to finalize the program.
CASH/TEND
(
=
)