Sam4s ER-180T Series - Logo Programming; Programming the Preamble Logo Message

76  Program Mode Programming SAM4s ER-180T Operator's & Programming Manual v1.4
Logo Programming
Programming the Preamble Logo Message
A preamble message of up to six lines can be printed at the top of each receipt. Each line can
consist of up to 24 characters.
1. Turn the key lock to the P position.
2. To begin the program, enter 7 0 0, press the SUBTOTAL key.
0 SUBTOTAL 0 7
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X
X/TIME
(
X
)
X Message Line
1
1
st
line of Preamble
2
2
nd
line of Preamble
3
3
rd
line of Preamble
4
4
th
line of Preamble
5
5
th
line of Preamble
6
6
th
line of Preamble
4.
SUBTOTAL
Enter up to 24
three-character
codes
5. Continue from step 3 to program additional lines or press the CASH/TEND key
to finalize the program.
CASH/TEND
(
=
)