Sam4s ER-180T Series - Program Scans

SAM4s ER-180T Operator's & Programming Manual v1.4 Program Mode Programming  79
Program Scans
Since much time and energy has been invested in the planning and programming of your ER-
180T, it is advisable to print a hard copy of the final program for future reference. This copy
should be kept in a safe place.
1. Move to the P position.
2. To print a program scan, enter 1 5, press the SUBTOTAL key.
5 SUBTOTAL 1
Department Program Scan
To read the program information for one department, press the department key on
the keyboard and press the same department key again.
DEPT1 DEPT1
To read the program information for multiple departments, press the first
department key on the keyboard and press the ending department.
DEPT1 DEPT10
PLU Program Scan
To read program information for a single PLU, enter the number of the PLU and
press the PLU key and enter the same PLU number and press the PLU key again.
PLU
Enter the PLU#,
(1-500)
Enter the PLU#,
(1-500)
PLU
To read program information for multiple PLU program information, enter
number of the first PLU in the series, press the PLU key, enter the number of the
last PLU in the series, and press the PLU key again.
PLU
Enter the first
PLU# (1-500)
Enter the last
PLU# (1-500)
PLU
Other Program Scans
To read other programs enter the code from the chart below and press the
X/TIME key.
X
X/TIME
(
X
)
Or,
4
X/TIME
(
X
)
Function
Ke
y
3. Press the CASH/TEND key to
finalize the program scan.
CASH/TEND
(
=
)
X Program
1
Tax
2
System option
3
Print option
4
Function keys (and press key to scan)
5
Clerk
6
Preamble message/ Postamble message