Sam4s ER-5100 - Department Programming Scan

29
2.8.4 DEPARTMENT PROGRAMMING SCAN
( 1 ) Press the “CASH/TEND” key.
( 2 ) Press the first “DEPARTMENT” key you want to scan.
( 3 ) Press the last “DEPARTMENT” key you want to scan.
If you want to scan only one department, press the same “DEPARTMENT” key twice.
NOTE : The first department number
≤ The last department number
EX ) To scan dept. 108 ~ 109
DEPT 2DEPT 1LEVEL 2CASH/TEND