52
9.3 PLU TO PLU CHAIN OPERATION
All preset PLUs in the same chain ( PLU to PLU linking ) will be automatically registered
when the first PLU of the chain is registered.
If a PLU located in the middle of the chain is registered, the following preset PLUs will be
automatically registered.
EX ) PLU 1000 is linked to PLU 50.
9.4 PLU ENTRIES BY CODE
This cash register can register PLU not only sequential index ( 1 ~ 1000 ) but also code up to 8
digits. If you want to register PLU by code, you must program PLU code on PLU programming and
set SYSTEM OPTION ADDRESS 9 to 1.
NOTE : PLU entries by code is same to PLU entries by sequential index.
PLU CODE AMOUNT
PLU CODE
PLU1 0 0 0 PLU1 2 3 4 5 6 7 8
PLU2 0 0 1 0
To Next Page
Loading...
