Sam4s ER-5100 - Reporting, Troubleshooting, and Reference; Report Generation and Balancing

76
3 REPORTS
3.1 OPEN TABLE ( or OPEN CLERK ) REPORT
NOTE : If you operate table management ( SYSTEM OPTION ADDRESS 46 = 0 ),
open table report will be issued,
while if you operate cashier overlap ( SYSTEM OPTION ADDRESS 46 = 1 ),
open clerk report will be issued.
NOTE : If open table ( or clerk ) exists, the reports in ‘Z’ mode will not be issued and an error
tone will sound ( ‘E9’ ).
So if you want to issue the reports in ‘Z’ mode, you must finalize the open table
( or clerk ).
A. X open table ( or clerk ) report ( Key lock : ‘X’ )
* SAMPLE OPEN TABLE REPORT * * SAMPLE OPEN CLERK REPORT *
SUBTL6