73
25 RECEIPT MESSAGE PRINTING OPERATION
25.1 PREAMBLE MESSAGE
If you want to print the receipt preamble messages on the receipt, you must program SYSTEM
OPTION ADDRESS 43 ( Page 41 ) after programming the preamble message descriptors.
* SYSTEM OPTION 43 = 0 * * SYSTEM OPTION 43 = 1 * * SYSTEM OPTION 43 = 2 *
25.2 POSTAMBLE MESSAGE
If you want to print the receipt postamble messages on the receipt, you must program SYSTEM
OPTION ADDRESS 44 ( Page 41 ) after programming the postamble message descriptors.
26 TRAIN MODE
If you want to operate the train mode, you must program SYSTEM OPTION ADDRESS 45.
Refer to SYSTEM OPTION ADDRESS 45 ( Page 41 )
NOTE : During the training mode, the journal paper will be not printed.
To Next Page
Loading...
