Sam4s ER-5100 - Page 41

40
ADDRESS OPTION VALUE STATUS
a YES = 1
NO = 0
b YES = 2
NO = 0
22 Print the “CASH” when only SINGLE ITEM is registered.
Print sale item no.
Subtotal is printed when the “SUBTL” key is pressed.
c YES = 4
NO = 0
SUM
= a + b + c
a YES = 1
NO = 0
b YES = 2
NO = 0
23 Inhibit TIME print on receipt and journal.
Inhibit MACHINE NO. print on receipt and journal.
Inhibit Z REPORT ISSUING COUNTER print
on receipt and journal.
c YES = 4
NO = 0
SUM
= a + b + c
a YES = 1
NO = 0
24 Inhibit DATE print on receipt and journal.
Inhibit CONSECUTIVE NO. print on receipt and journal.
b YES = 2
NO = 0
SUM
= a + b
25 The date format is Month, Day and Year =
* Same in validation Day, Month and Year =
Year, Month and Day =
a 0
1
2
a
26
Decimal for print and display : No decimal =
Set at one place =
Set at three places =
Set at two places =
a 1
2
3
0
a
27 Enter the HDLO ( High Digit Lock Out ) 0.01 ~ 0.09 =
for the total amount allowed for RECD ACCT 0.01 ~ 0.99 =
& PAID OUT transactions. 0.01 ~ 9.99 =
0.01 ~ 99.99 =
0.01 ~ 999.99 =
0.01 ~ 9999.99 =
0.01 ~ 99999.99 =
a 1
2
3
4
5
6
7
a
a 1
0
b 2
0
28 Clerks are Pop-up =
Stay-down =
Secret sign-on code =
Push button =
15 Clerks =
4 Clerks =
c 4
0
SUM
= a + b + c
29 Allow clerk change without clerk sign-off operation.
a YES = 1
NO = 0
a
30
Select the currency logo. Default = ■
Other logos ( Refer to page 87 : “CHARACTER CODE TABLE” )
a 0
CODE
a
31 Disable NON-ADD NUMBER function.
a YES = 1
NO = 0
a
a YES = 1
NO = 0
b YES = 2
NO = 0
32 Disable NO SALE function.
Inhibit NO SALE after NON-ADD NUMBER entry.
Enforce NON-ADD NUMBER entry at the beginning of sale.
c YES = 4
NO = 0
SUM
= a + b + c
33 Number of digits required for NON-ADD NUMBER entry.
( ‘0’ allows any length, 1 ~ 8 digits )
a 0
1 ~ 8
a
a YES = 1
NO = 0
34 ADD CHECK advances the consecutive no. at final tender only.
Compulsory validation on ADD CHECK.
b YES = 2
NO = 0
SUM
= a + b