Sam4POS Quick Start v1.1 Program Mode - 53 -
7. Scroll through the images and select the desired
image for your key;
8. Note: Pressing CANCEL in the upper right corner
will exit without saving the image:
9. The selected Image can be cropped as desired to the
load just the image portion you want.
10. Press the SAVE icon at the top of the display
to save the selected image for your key. The image
will be added to your selection and will display on
the key when in the Programming mode and in the
REG Mode:
11. The image selected is added to the key.
To Next Page
Loading...
