Sam4POS Quick Start v1.1 Connecting Devices - 73 -
• GOTO – Brings up the Device Setting programming.
• NEW – To add additional Kitchen Printers.
• EDIT – Allows changes to the settings for the selected Kitchen Printer. You can select an
individual printer or multiple printers to edit all at one time.
• DELETE – Will delete the selected Kitchen Printer.
Edit Kitchen Printers
If necessary, you can edit the kitchen printer information.
1. Select a Kitchen Printer from the list you wish to edit; Press the EDIT button to open EDIT item dialog:
a. DESCRIPTION - You can delete and type in a new description for the device (up to 30
characters) if desired.
b. SELECT DEVICE - Choose the printer from the list of available printers as set in the Device
Setting.
c. SELECT FROM TERMINAL - Chose the terminal from the list where the device is connected.
d. TICKET COUNT - Set the number of KP tickets to be printed.
e. KP TYPE - Select the type for the specified device.
• Normal – Prints all items on one ticket.
• Single – Prints each item on a separate ticket; (regardless of the KP Option settings).
• Normal & Single – Prints all items on one ticket & prints each item separately.
• Single & Normal – Prints each item on a separate ticket & prints all items on one ticket.
f. SELECT BACKUP DEVICE - Set if you wish to define a backup device in the case the main
device is offline.
g. SELECT BACKUP TERMINAL - Select the terminal where the backup device is connected.
2. Press OK when complete to add the device mapping or press CANCEL if you want to exit without
mapping additional kitchen printers.
To Next Page
Loading...
Need help?
General
