Sam4s SAM4POS - Initial Clear

- 62 - Program Mode Sam4POS Quick Start v1.1
Initial Clear
The initial clear function allows you to exit any register activity and return to a beginning or cleared state.
No program data is lost by performing this operation.
1. In versions 1.0.26 and later: Tap the Version information, in the lower right corner, three times to initial
clear the SAM4POS terminal. (In versions before 1.0.26: tap the SAM4s logo displayed on the main sign
on screen three times.)
2. The Notification dialog displays:
3. Press YES to proceed with the initial clear; or press NO to exit without the initial clear.
4. Sign on to the SAM4POS as normally.