Sam4POS Quick Start v1.1 Connecting Devices - 69 -
Connecting Devices
Device programming is where all the individual peripheral devices used on the SAM4POS
system are configured and mapped (routed) to the all the stations in the system. The
peripheral devises available for use on the SAM4POS are Printer, Scanner, Line Display,
Scale, EFT, Coin Dispenser, Liquor Dispenser, Kitchen Video, and Text Inserter.
Other programming areas include: KP Group programming, Card Read Format settings and
the EFT Operation menu is accessed from here as well.
Note: Device Mapping and KP Group programming changed in v1.0.80 and later, be sure to refer to the appropriate
programming for your specific version.
1. Select DEVICE from the PROGRAM MODE main menu selection screen.
2. The DEVICE menu selection dialog displays; touch the program area you wish to edit from the menu
selections.
Note: MSR setting is only available on the SAP-4800II.
To Next Page
Loading...
