MAIN MENU
The menus contain the base machine setup, input
and output measurements, settings and module
status and related logs. The menus can be acces-
sed by pressing the Menu button (three horizontal
lines). Pressing the Menu button again takes you
back to the basic display.
SYSTEM INFORMATION
When you press the F4 button in the main menu,
you can view system information such as the name
of the software loaded in the monitor, author of the
last revision and the date of the revision. By pressing
F1, F2 or F3 you can view information on modules,
the modem or log. The Back button takes you back
to the previous page. Pressing F1 on the subpages
takes you directly back to the main menu.
SETTINGS
You can change the display settings by clicking the
F3 button in the main menu. Then by pressing F1,
F2 or F3 you can view information on the display,
date and time as well as language. The Back button
takes you back to the previous page. Pressing F1 on
the subpages takes you directly back to the main
menu.
To Next Page
Loading...
General