SUBMENUS
The images and text at the bottom of the main display indicate the functions of the F1-F4
buttons in each display. The purpose of these submenu displays is to provide you with some
of the most important facts collected on templates.
Adjustments
When pressing the F1 button in the main menu,
a window opens in which you can select the
crane adjustments, driver selection and func-
tion parameters.
The function parameters open a new page
on which you can select the vibration filters,
power limits or other parameters.
You can return to the previous page from the
subpages by pressing the F4 button.
Adjusting the diesel engine revolu-
tion speed
When you press the F4 button in the main
display, the diesel engine revolution adjust-
ment window opens.
In this window, you can
- adjust the idle speed by pressing F1
- adjust working revolutions by pressing F2
- adjust full throttle by pressing F3
- return to the main page by pressing F4
To Next Page
Loading...
General