Alignment and Adjustments
3-8Samsung Electronics
■ Indoor unit LED lamp display at error detecting (cont.)
Operating
LED lamp display
Error type
5. Breakaway of COND MID sensor
6. 2
nd
detection of refrigerant completely leak
7. 2
nd
detection of high temperature COND
8. 2
nd
detection of high temperature DISCHARGE
9. COMP DOWN due to 2
nd
detection of low
pressure switch
10. Error of reverse phase
11. Compressor down due to 6
th
detection of
freezing
12. Self-diagnosis of condensation sensor (G8, G9)
13. Compressor down due to condensation ratio
control
Error of float switch
Error of setting option switches for optional
accessories
EEPROM error
EEPROM option error
Displayed on appropriate indoor unit
which is operating
Displayed on outdoor unit
: On : Flickering : Off
- If you turn off the air conditioner when the LED is flickering, the LED is also turned off.
- If you re-operate the air conditioner, it operates normally at first, then detects an error again.
To Next Page
Loading...
Need help?
General
