Samsung IAB Series - Product reassembly method - 5) Sub screen seam control 110”

LED R&D Lab(VD)
143
After removing BEZEL, you can
adjust the height difference, tilt
between SUB SCREENs with SUB
SCREEN top SCREW.
Ladders are required in some cases
when adjusting the top
Insert a 3 mm hexagonal wrench into the screw
Counterclockwise rotation: Screen downward movement
Clockwise rotation: Screen upward movement
Product reassembly method – 5) Sub screen seam control 110”
□ Seam control between sub screens (Y)