LED R&D Lab(VD)
6
◆ Installation precautions (LED damage)
precautions Image
[External impact, fall caution]
1 Remove the cover-corner of the product before installation and do not
impact the LED surface or drop it on the floor.
2 Do not place the product on the vibrator and do not place the LED
surface facing the floor.
3 Make sure that the edge of the LED module is not damaged by external
contact.
4 Do not load more than 12 steps.
① ②
③ ④
[Watch out for LED damage caused by static electricity]
▶ Do not work by touching the LED surface with hands without gloves.
[Caution of LED damage caused by metal]
▶ Be careful not to get metal on the front of the LED.
▶ When attaching the metal, separate the module and remove it using a
magnet.
MODULE
Front
metal
1. Product and installation information
To Next Page
Loading...
