LED R&D Lab(VD)
57
MAIN
B’d
SMPS
B’d
SMPS
B’d
SMPS
B’d
Inlet
B’d
OCM고정
사출물
LEFT CENTER RIGHT
BN39-02835A
BN39-02833A
⑩ Connect the cable below whenever you hang one ASSY BRACKET P-FRONT to the P-FRAME. (110 inch)
- After creating a space by pulling the bottom of the P-FRONT, connect the OCM cable to the CN701 of the BN41-03045A board
- After attaching P-FRONT to P-FRAME, connect BN39-02835A of P-FRONT and BN39-02833A of P-FRAME
- The cable dummy exposed to the bottom of the set is pushed into the gap between P-FRONT and P-FRAME
BN41-03045A
Fig.1 create FRONT space Fig.2 OCM cable connect
Fig.3 BN39-02835A –
BN39-02833A connect
OCM cable
4. FRAME installation and cable connection
To Next Page
Loading...
