LED R&D Lab(VD)
26
② Before installing FRAME on Wall Mount, the following connection is required
- Connect the power cable to the left frame and right frame, respectively
- Connects 2 Power Cords
- Since it is difficult to access after installation depending on the environment,
connect the external terminal (HDMI, LAN, DP, etc.) cable to be used
※ Power cord – Connect the outlet power when set operation is required, do not connect in advance
Power Cord Power Cable
Connect the
outlet when set
operation is
required after
P-FRONT is
completed
4. FRAME installation and cable connection
To Next Page
Loading...
