Samsung IAB Series - Screen Settings for Side by Side Installation; Installation Method and Connections

LED R&D Lab(VD)
150
Screen Settings for Side by Side Installation
□ Side by Side Installation Method
- Install two IAB sets side by side from side and connect the video source (HDMI)
- When activating the HDR function, 3.5pi stereo cable connection is required to match the brightness between
the two sets as shown in the figure below
Back side external input port
Connect 3.5pi stereo cable
to HDR DATA OUT port
Connect 3.5pi stereo cable
to HDR DATA IN port
① ②
③ ④
IAB A set LEFT
IAB B set Right
① ②
※ 3.5pi stereo cable is not provided.