◇ Precautions for Appearance Washing
8
- It is recommended to wipe with a soft cleaning cloth provided with the
product, and to wash with a small amount of glass cleaning agent
provided with surfactant-based glass cleaning agent only if there is a
contaminated area that is not easily removed. (However, do not spray
glass cleaning agent directly on the screen)
- If there is hard dust on the surface during cleaning, there may be
damage to the surface film and LED, so remove the dust from the surface
and wash it.
★ caution ★
1. Product and installation information
- Be careful of damage when cleaning with a gap between Half-Cabinet.
- Be careful of damage when cleaning between modules and modules in Half-Cabinet.
- Do not put cloth or other substances between the gaps or spray detergent directly.
- Do not sweep or wipe the LED surface with hard materials such as paper
towels, brushes such as combs and brushes, and sponges made of acrylic or
iron.
- Do not use chemicals such as wax, benzene, mosquito repellents, air fresheners,
lubricants, cleaning agents, etc. in products.
To Next Page
Loading...
