Samsung IAB Series - Product disassembly method - 1) Screen Desorption 110”

LED R&D Lab(VD)
92
① BEZEL TOP/BOTTOM disassemble :
screw disassemble
SCREW
BRACKET-SUPPORT L/R
SCREW SPECIAL
SCREW MACHINE
1
3
2
ⓐ
ⓑ
MAGNET
SCREW
⑤ Place the EPE PAD on the floor, place
the module facing the floor, and
assemble the COVER CORNER to prevent
damage.
① Front 분해
Product disassembly method – 1) Screen Desorption 110”
② BEZEL SIDE disassemble : Magnet desorption
③ BRACKET-SUPPORT disassemble
④ Separated in order of outside → inside (1 → 2)
* Before separation, pull the bottom to create a space and
remove the CABLE first