Samsung RF263 Series - Inspect the Ice Valve Operation; Inspect the Water Hose Bending

- 10/65 -
Step 1
① After disassemble the Ice Bucket and ice
maker
Right side button on ice maker turns on for
2 sec
① Takes Max “6 Min” (including Heating
time)
- When the water does not come Check
Step 2
- When the water come  Check TIP 2-5
Step 2
① Inspect the WATER HOSE bending
② After disassemble the ASSY Valve, Purple 2
Pin Check
- Normal part : 350~450 Ω
- Failure part : Open or 0 Ω
③ Check the housing No.1(PRP/BLK)
+ No.6(PRP/BLK)
Step 2
① Check MAIN PBA + Liner CONNECTOR
- Check CN70 No.5(RED)+CN73 No.1(PRP)
Check Point
Inspect ICE MAKER Water supply problem
Tip 2-3. Inspect the Ice Valve operation
CN 73
CN 70