Samsung RF263 Series - Ice Room Sensor Error

- 24/65 -
Error-code : 15 E
Ice Room Sensor Error
Block
① Disassemble the FF-Ice Room Cover
② Inspect Yellow CONNECTOR disassembly No.3(YEL)+No.4(YEL) Pin
contact/switching
③ Normal when measure resistance : 3~40KΩ  Inspect the bottom WIRE
“ Failure : Open or ∞ Ω  Replace the ICE MAKER
CONNECTOR ① Inspect the CONNECTOR
No.3(YEL) + Main PBA
CN78 No.10(ORG) WIRE
OPEN
② Inspect the CONNECTOR
No.4(YEL) + Main PBA
CN78 No.12(S/BLU) WIRE
OPEN
Main PBA ① Inspect the normal condition
after replace it
Measure Main PBA CN78
No.10(ORG)+No.12(S/BLU)
DC voltage with
CONNECTOR connection and
POWER ON condition
Normal : Measure DC 1.2~4
V
Failure : DC 1.3V ↓,4V↑
CN 78
Ice Room
Back to List 