Samsung RF263 Series - Ice Maker(FF)-Sensor

- 23/65 -
Error-code : 14 E
Ice Maker(FF)-Sensor
Block
① Disassemble the FF-Ice Room Cover
② Inspect Disassemble the Yellow CONNECTOR No.1(GRY)+6(BRN) Pin
contact/switching
③ Normal when measure resistance : 3~40KΩ  Inspect bottom WIRE
“ Failure : Open or ∞ Ω  Replace ICE MAKER
CONNECTOR ① Inspect CONNECTOR
No.1(GRY) + Main PBA
CN90 No.7(GRY) WIRE
OPEN
② Inspect CONNECTOR
No.6(BRN) + Main PBA
CN90 No.1(BRN) WIRE
OPEN
Main PBA ① Inspect normal condition
after replace it
Measure Main PBA CN90
No.1(BRN)+7(GRY) DC
voltage on CONNECTOR
contact and POWER ON
condition
Normal : Measure DC 1.2~4
V
Failure : DC 1.3V ↓,4V↑
Ice Room
CN 90
Back to List 