Samsung RF263 Series - Error-code: 1 E FZ-Room Sensor Error

- 15/65 -
Error-code : 1 E
FZ-Room Sensor Error
Block
① Disassemble the FZ-Room BOX
② After disassemble the Sensor Cover and inspect the Wire Open
③ Measure the Main PBA DC voltage
- Normal : DC 1.2V(100℉) ~ 4.0V(-13℉)
- Failure : DC 1.3V ↓,4V↑  Inspect bottom WIRE
CONNECTOR ① Inspect the Main PBA CN30
No.4(RED)+
PBA “GND” marked area
and DC voltage measuring
- Normal: DC 1.2V(100℉)
~ 4.0V(-13℉)
- Failure : DC 1.3V ↓,4V↑
Main PBA
CN 30
Back to List 