- 45/65 -
Step 1
① Disassemble R room DOOR-L UPP
COVER
② Inspect WATER HOSE bending
③ Inspect TUBE-FITTING direction
changing
④ Inspect inner TUBE-FITTING SPRING failure
Step 2
① Disassemble the Hose of Dispenser side.
② Replace the Door when water comes
through hose from Cabinet side, because it
is hose freezing inner door and blocking.
Step 3
① Disassemble R room Case VEG
② Disassemble ASSY Case Filter Tank
③ Inspect Water Hose bending
Check Point
Inspect WATER HOSE LINE
Tip 3-4. Inspect WATER HOSE
Water direction
OK
NG
Door Part
Hose
disassemble
To Next Page
Loading...
