- 7/65 -
Step 1
① Remove the Ice bucket
in ice room
① Remove 2 screws as shown
② Remove the ice maker after pulling the
cooling pipe which is in the bottom of ice
maker.
Step 2
① Remove the Auger Motor and inspect the
Motor
- Normal = GRY+BLK 3~5 Ω
- Defective = Open or 0 Ω
Step 3
① Inspect the Main PBA + CONNECTOR Wire
- CN73 No.3(PNK) + CN70 No.5(RED)
Check Point
Inspect the Auger Motor .
Tip 1-3. Inspect ASSY Auger Motor operation
CN 73
CN 70