Samsung RF263 Series - Tip 4-2. Inspect WATER DISPENSER DRIPPING

- 47/65 -
Step 1
① Disassemble the TOP TABLE
② Inspect TUBE-FITTING HOSE
- SCRATCH / Less inserting
③ Inspect ASSY CASE FILTER WATER HOSE LINE
- HOSE SCRATCH / Less inserting
 SCRATCH part
Connect again after CUTTING
※ WATER DRIPPING occurs as
WATER LINE AIR
Step 3
① Inspect WATER TANK AIR
② Dispense inner AIR with shaking CASE FILTER
left-right pushing WATER LEVER.
Step 4
① When water comes after disassemble the
ASSY CASE-FILTER Water-TANK exit HOSE,
Water valve is failure.
 Replace Water Valve
Step 5
① Disassemble Water hose which is connected
to product.
② Inspect the bubble occurrence in the water
when supply water into container.
-If the BUBBLE appear it is not the problem
of the product
Step 6
① It is no problem that the ice melting from
ICE dispensing and flow to CASE DISPENSER.
- Customer explanation
Check Point
Inspect WATER HOSE LINE LEAK
Tip 4-2. Inspect WATER DISPENSER DRIPPING
BUBBLE
HOSE SCRATCH