Samsung RF263 Series - Tip 4-1. Inspect WATER LINE LEAK

- 46/65 -
Step 1
① Disassemble the TOP TABLE
② Inspect inserting condition until
TUBE-FITTING O-ring
Step 2
① Inspect WATER HOSE SCRATCH
 Connect again after cutting the SCRATCH
part
② Less inserting amount of TUBE FITTING HOSE
 Insert again into inside
③ HOSE CUTTING as diagonal line
 Connect after cut as right angle again
Step 3
① Inspect inner R room CASE FILTER TUBE
FITTING connection part CLIP connection
omit and hose inserting failure
② Inspect backside of WATER VALVE HOSE
③ Inspect backside HOSE connection part
Check Point
Inspect WATER HOSE LINE LEAK
Tip 4-1. Inspect WATER LINE LEAK
GOOD
NG
HOSE SCRATCH
Less inserting
CLIP
CLIP omit
Less inserting
LEAK