Samsung RF263 Series - Inspect Cycle Noise

- 58/65 -
Step 1
① Disassemble the back-side of UNIT COVER.
② Dryer angle should be level on back-side
machinery room.
Step 2
① When the “Poo~” “growling” sound occur in
the cabinet
② Disassemble EVAP COVER.
- Capillary Pipe welding part should be as “-”.
③ Wrap the RUBBER.
Check Point
Inspect NOISE
Tip 8-2. Inspect CYCLE NOISE
Make the PIPE should be
straight.
Inspect RUBBER
DRYER angle as level
DRYER angle