Installation and Operation Manual
There are a couple of methods to filter AIS
vessel in this unit as below.
Filter by Type : The type of vessel which is
selected will not be displayed on the chart.
Filter by distance : Vessels outside the
radius of selected distance from own ship is
filtered.
Filter by speed : Vessels with speed below
the set value are filtered.
Show Dangerous Only : When this option
is selected, it shows dangerous vessel only.
4-6-2 Alarm Option
Dangerous Vessel Alarm : When this
option is selected an alarm will activate. Even
this option is not selected; dangerous vessels
will still be on the chart.
TCPA Limit : Set the Time of Closet Point of
Approach limit.
CPA Limit : Set the Closet Point of Approach
limit.
Proximity alarm : Trigger an alarm when
any AIS equipped vessel is within a set
proximity radius.
Proximity radius : Set a radius for
proximity alarm.
4-6-3 Display Option
Projected course : Set a time for projected
course. The project course show the estimate
course of vessel base on the given time.
Range rings : Select a number of Range
rings.
4-6-4 Restore Default
Returns every AIS setting to default..
To Next Page
Loading...
