SANY SY75 - Lift Chart: Blade down

SY75C Excavator OMM Lifting Range
SANY Operation and Maintenance Manual — 0220 6-7
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
Lift Chart: Blade Down
LPH in
feet (m)
Rated capacity in pounds (kg)
LPR in feet(m)
3 (1) 7 (2) 10 (3) 13 (4) 16 (5)
Lift capacity at
max radius
End
Side
End
Side
End
Side
End
Side
End
Side
End
Side
20
(6.0)
*3,050
(*1,385)
*3,050
(*1,385)
*2,670
(*1,210)
*2,670
(*1,210)
16
(5.0)
*2,975
(*1,350)
*2,975
(*1,350)
*2,250
(*1,020)
*2.250
(*1,020)
13
(4.0)
*2,900
(*1,315)
*2,900
(*1,315)
*2,985
(*1,335)
*2,985
(*1,335)
*2,335
(*1,060
*2,335
*1,060)
*2,095
(*950)
*2,095
(*950)
10
(3.0)
*4,650
(*2,110)
*4,650
(*2,110)
*3,770
(*1,710)
*3,770
(*1,710)
*3,385
(*1,535)
*3385
(*1,535)
*3,220
(*1,460)
2,700
(1,225)
*2,050
(*930)
*2,050
(*930)
7
(2.0)
*5,015
(*2,275)
*5,015
(*2,275)
*3,925
(*1,780)
3,660
(1,660)
3,495
(1,585)
2,625
(1,190)
*2,095
(*950)
*2,095
(*950)
3
(1.0)
6,150
(2,790)
5,290
(2,400)
*4,550
(*2,065)
3,305
(1,590)
*3,780
(*1,715)
2,545
(1,155)
*2,115
(*960)
2,095
(950)
0.0
*4,820
(*2,185)
*4,820
(*2,185)
*6,800
(*3,085)
5,100
(2,315)
*4,970
(*2,255)
3,375
(1,530)
*4,000
(*1,815)
2,480
(1,125)
*2,435
(*1,105)
2,160
(980)
-3
(-1.0)
*4,640
(*2,105)
*4,640
(*2,105)
*7,500
(*3,405)
*7,500
(*3,405)
6,920
(3,138)
5,015
(2,275)
*5,105
(*2,315)
3,320
(1,505)
*3,980
(*1,805)
2,460
(1,115)
*2,870
(*1,300)
2,360
(1,070)
-7
(-2.0)
*7,530
(*3,415)
*7,530
(*3,415)
*9,390
(*4,260)
*9,390
(*4,260)
*6,515
(*2,955)
5,025
(2,280)
*4,805
(*2,180)
3,330
(1,510)
*3,705
(*1,680)
2,810
(1,275)
-10
(-3.0)
*5,280
(*2,395)
5,160
(2,340)
*4,155
(*1,885)
4,010
(1.820)
Capacities marked with an asterisk (*) are limited by hydraulic capacities. (See Note 2)
NOTE 1 Lift capacities shown are without power boost feature.
NOTE 2 Lift capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities.
NOTE 3 Least stable position is over the side.
NOTE 4 Lift capacities apply only to the machine as originally manufactured and normally equipped by the manufacturer
NOTE 5
Included in this mass are triple grouser shoes, 3,720 mm boom, 2,050 mm stick, all operating fluids, and a 75 kg
operator.
NOTE 6 Lift capacities are in compliance with ISO 10567:2007
NOTE 7 The load point is the centerline of the bucket pivot mounting pin on the arm.
NOTE 8 No bucket