Machine Decals SY75C Excavator OMM
2-10 Operation and Maintenance Manual — 0220 SANY
MACHINE DECALS
All safety, alert and warning decals must be in place, undamaged, and not covered. You must be thoroughly
familiar with the location and content of all decals on the machine. Walk around the machine and review each of
them. Decals provide important instructions and warnings and must be read prior to any operational or
maintenance function. Do not remove any decal from this machine.
NOTE: Your SANY distributor can supply you with new replacement decals if needed. Never modify or
change existing decal information unless authorized by your SANY distributor.
When replacing decals, be sure they are placed in the proper locations. Please note that the decals shown in this
manual may not exactly match what you have on your machine. Contact your SANY dealer if you have any
questions as to meaning and placement.
NOTE: Additional safety or warning decals may be added to your machine if necessary.
Location and Meaning
1. Back-up warning
• Located on the back/rear of the machine.
• Informs and warns to stay clear of the machine
moving in reverse and/or the upper structure
rotates.
To Next Page
Loading...
