SANY SY75 - Switch Signals Screen; Machine Configuration Screen

SY75C Excavator OMM Monitor
SANY Operation and Maintenance Manual — 0220 3-27
TABLE OF
CONTENTS
INTRODUCTIONSAFETY
MACHINE
CONTROLS
MACHINE
OPERATION
MAINTENANCESPECIFICATIONS
OPTIONAL
EQUIPMENT
• Eng Speed - Displayed in rpm
Press F1 or the up or down arrows to toggle between this and the Switch Signals screens.
Press F4 to display the main operator screen.
Switch Signals Screen
The Switch Signals screen displays:
• Start Input
• Air Cleaner Plugged
• Shutdown Input
• Hi/Lo Speed Input
• Start Output
• Preheat Output
• Shutdown Output
• Hi/Lo Speed Output
Press F1 or the up or down arrows to cycle through the running parameter screens.
Press F4 to display the main operator screen.
Machine Configuration Screen
The Machine Configuration screen displays:
• Machine Model
• Machine S/N
• Control System
Press F4 to display the main operator screen.
ƫɅȷɂȱȶΎƫȷȵȼȯȺɁ
Start Input
Air Cleaner
Plugged
Shutdown
Input
Pilot Input
Hi/Lo
Speed
Input
Start Output
Preheat Output
Shutdown
Output
Pilot Output
Hi/Lo
Speed
Output
Fig. 3-35
Machine Configuration
Fig. 3-36